leclerc flying shuttle

It allowed a single weaver to weave much wider fabrics, and it could be mechanized, allowing for automatic machine looms. The flying shuttle is a beater with shuttle boxes at each end. The bobbins are available in two sizes (see below to the left). The flying shuttle was one of the key developments in the industrialization of weaving during the early Industrial Revolution. This results in a more uniform tension and removes the need for the weaver to adjust each weft shot to produce an even selvedge. They are made of Maple and have a narrow knife shaped edge to allow them to beat the weft. Leclerc Boat Shuttles are made with the finest Canadian Maple, cut into a classic well balanced design which is then sanded and polished to a brilliant shine. Our Professionnal Shuttles for Flying Shuttle beaters are: 15" long x 1 5/8" deep x 1 3/8" high. A hole is cut in the edge for the thread in the versions with the removable rod. Designed to match the beautiful hand-crafted shuttles made in years gone by, the graceful shape of the Traditional shuttle fits perfectly into the natural curves of the weaver's hand. Note: Items with a shipping length of 48” and longer are subject to a surcharge, regardless of the shipping method selected. A special tension device allows the weaver to adjust the tension for each type of yarn. Make sure that your loom produces a wide enough shed before ordering the larger shuttles. Four different sizes of are available. A special Endfeed Flying Shuttle (EFS) with metal pointed tips is used in the flying shuttle beater. The Leclerc Professional Flying Shuttle is made of hardwood with stainless steel pointed tips to deflect warp threads mounted with a dampening pad to absorb impact. The pointed ends of the shuttle are curved to fit comfortably into the weaver's hand in a similar fashion as Leclerc's standard boat shuttles. (Click on picture to enlarge). Typically Ships In: 4 - 6 Weeks. These unique cost effective shuttles will last a lifetime and come in either Red, Blue, Yellow and Green. Features: End Feed Tension Device; Solid Maple Construction; Lacquer Finish; Open Bottom; Dimensions: 1.625" x 1.375" x 15" (4.1cm x 3.5cm x 38.1cm) Unlike lower cost shuttles that require the weaver to thread the yarn around a maze of hooks, the Leclerc End Feed Shuttle can be threaded easily and effortlessly with no need to remember a complex threading pattern through the shuttle or put on your reading glasses to thread the yarn through a hole! Leclerc End Feed Shuttles are the simplest to use and the most flexible on the market. Leclerc Manual or Electric Bobbin Winders are perfect for this task. It is especially useful in weaving studios where long yardages are made. This feature ensures small snags in the yarn will not release the pirn during weaving causing the mechanism to jam and the weaver to have to waste time reseting the pirn and fixing the selvedge. The flying shuttle is a beater with shuttle boxes, Beautiful slim maple boat shuttles recommended for, For perfect selvedges and speedy weaving, many wea, These beautiful maple boat shuttles are available, Dimensions: 1.625" x 1.375" x 15" (4.1cm x 3.5cm x 38.1cm), Bluster Bay End-Feed Boat Shuttle - Honex. The slim boat shuttle and the flying shuttle, all have closed bottom designs. This shuttle is designed for use with the Leclerc Flying Shuttle Beater. These Leclerc Rag Shuttles are made from Canadian Maple with a smooth varnish finish. Shuttles are lacquered an measure 13.5"x2.75"x2"), weight: 5.7 oz. The wear guard extends the life of the shuttle long beyond those flying shuttles designed with a completely wooden guide. The yarn travels through a brass guide mechanism that incorporates an adjustable tensioning device that allows the weaver to set the tension based on the yarn type and the weaver's personal preference. They and the larger spool (shown right) are only available in plastic. Additional Pirns can also be ordered. Note: Pirns are wound from one end to the other unlike bobbins where the yarn is wound back and forth across the length. They are perfect for beginners and experienced weavers alike! The flying shuttle beater is made to be adapted to any LECLERC looms 45" and 60" (115 and 150 cm) counter-balance models (as MIRA and FANNY), jack-type models (as NILUS, NILUS II, NILART and Colonial) and the new countermarch Nilus II model. Unlike products from competitors which have bull-nosed ends which are easier to manufacture, Leclerc EFS shuttles have a streamlined design that allows it to move quickly across the warp. Want to improve your selvedges and speed up your weaving? Made of lacquered beech. The yarn feeds through the tension device quickly and easily. These Leclerc Ski Shuttles are made from Canadian Maple to be used with medium to heavy yarn or rags. The Pirn holder on Leclerc End Feed shuttles is designed to hold the pirn in place while in use, but enables it to be quickly removed for winding. The yarn is quickly fed through the shuttle without the pain of threading through holes or hooks. The Leclerc Professional Flying Shuttle is made of hardwood with stainless steel pointed tips to deflect warp threads mounted with a dampening pad to absorb impact. Weaving Tip - These shuttles are the perfect way to avoid mistakes when weaving with multiple colours of warp yarn that have a similar shade. Flat Shuttles are available in 7 lengths. (Click on Picture to Enlarge). Commonly found on industrial weaving equipment and flying shuttles, the yarn is wound on a pirn in the shuttle and flows easily off and out the back of the shuttle as it transverses the warp. A special shuttle is required for this system. The yarn travels through a brass guide mechanism that incorporates an adjustable tensioning device that allows the weaver to set the tension based on the yarn type and the weaver's personal preference. These Leclerc Netting Needles are made of nylon for flexibility and are ideal for pick-up, inlay and netting. This 4 shaft jack-type, Leclerc Nilus Low Castle Floor Loom - 4 Harness. (Fee is imposed by the shipping carriers. The yarn wraps around the shuttle so it slides easily through the warp. Up for sale is this wooden weaving shuttle for a large Leclerc floor loom. One of Leclerc's new Professional Flying Shuttles (6124-9000) is included with the beater option.The EFS shuttles use pirns instead of bobbins to allow the yarn to easily come off one end. A hammer in the shuttle box, put in motion by a cord and handle, strikes the shuttle, and sends it though the shed without the weaver touching it. Boat Shuttle heights are listed in the chart below. These Leclerc Bobbins and Spools are designed to fit Leclerc shuttles and bobbin racks but may be used in other vendor's products. Versions in different lengths and with or without a removable rod to hold one or more bobbins are available (bobbins extra). This is especially important with textured or "hairy" yarn that may occasionally bind together. The yarn feeds through the tension device quickly and easily. Load each colour of yarn into a different coloured shuttle and you will find it easier to remember to alternate the coloured shuttles as you weave! 15" shuttle can be used with a flying shuttle beater. They come in five sizes and each has a metal bobbin support made of spring steel and a styrene bobbin . It is especially useful in weaving studios where long yardages are made. These are made of hard wood and the two EFS shuttle Pirns have a metal tip for the locking mechanism. John Day Rag Rug Shuttles The elimination of the need to spin a bobbin also reduces drag on the shuttle making it easier to throw. Note that for the Large Boat Shuttle, remember to add 1/4 inch to allow for the fact that the bobbin and yarn extend slightly above the wooden shuttle. To commemorate the 125th Anniversary of Leclerc Looms, the company has re-introduced the Traditional shuttle which is reminiscent of those produced by the company during its first century of operation. The flying shuttle, which was patented by John Kay in 1733, greatly sped up the previous hand process and halved the labour force. It is marked SHC 10/3. A special tension device allows the weaver to adjust the tension for each type of yarn. These Leclerc Flat Shuttles are used with heavy yarn, simple looms or when only a few rows of thread are required for colourwork. Local pick-up is also an option. ), 15" shuttle can be used with a flying shuttle beat, Leclerc Sectional Warp Beams - Can be used on othe, The Nilus Low Castle Loom from Leclerc with 4 Harn, Leclerc Artisat Floor Loom The weaver simply grabs the yarn end and pulls it through a slot in the shuttle side. A hammer in the shuttle box, put in motion by a cord and handle, strikes the shuttle, and sends it though the shed without the weaver touching it. These new colored boat shuttles are made of high impact plastic (High Density Polyethylene), have the same shape as the traditional shuttle and are virtually indestructible. Weaving Tip - While larger boat shuttles hold more yarn, they do require a larger shed to be able to pass through the loom warp threads.